The H2OV comes with a 1/4-20 mounting block that can be attached anywhere on the housing to accommodate specific mounting requirements. The standard placement for the mounting plate is centered approximately 3 inches back from the front of the housing, on the side opposite the record control. 

To attach the mounting block - clean the desired location with alcohol, peel the adhesive backing and press firmly. For best results wait 24 hours before use. We use industrial VHB adhesive tape, once the mounting block is attached to the housing it will not come off.

For mounting the H2OV to a helmet, light tray, handle mount, or DPV. ( see                       )   for our line of professional mounts by GMS Concepts.
Mounting Information